Evaluation of air pollution tolerance index and anticipated performance index of plants and their application in development of green space along the urban areas

Air pollution due to vehicular emissions has become one of the most serious problems in the whole world and has resulted in huge threat to both the environment and the health of living organisms (plants, humans, animals, microorganisms). Plants growing along the roadsides get affected at the maximum as they are the primary recipients to different air pollutants and show varied levels of tolerance and sensitivity. Taking this into account, the present work was based on assessment of seasonal variation in air pollution tolerance index (APTI) and anticipated performance index (API) of four roadside plants, namely, Alstonia scholaris, Nerium oleander, Tabernaemontana coronaria, and Thevetia peruviana belonging to family Apocynaceae. APTI was calculated by the determination of four important biochemical parameters, viz., pH, relative water content (RWC), total chlorophyll (TChl), and ascorbic acid (AsA) content of leaves. The leaf samples were collected from plants growing at seven different sites of Amritsar (Punjab), India, for pre-monsoon and post-monsoon seasons. Highest APTI (82.14) was reported in N. oleander during the pre-monsoon season while the lowest was recorded in T. coronaria (18.59) in the post-monsoon season. On the basis of API score, A. scholaris was anticipated to be an excellent performer during the pre-monsoon and post-monsoon seasons followed by N. oleander, T. coronaria, and T. peruviana. Linear regression analysis and Pearson’s correlation coefficient depicted significant positive correlation between APTI and ascorbic acid content during the pre-monsoon and post-monsoon seasons.     

Use of recycled plastic in concrete: a review

Numerous waste materials are generated from manufacturing processes, service industries and municipal solid wastes. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. Solid waste management is one of the major environmental concerns in the world. With the scarcity of space for landfilling and due to its ever increasing cost, waste utilization has become an attractive alternative to disposal. Research is being carried out on the utilization of waste products in concrete. Such waste products include discarded tires, plastic, glass, steel, burnt foundry sand, and coal combustion by-products (CCBs). Each of these waste products has provided a specific effect on the properties of fresh and hardened concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing disposal problems. Reuse of bulky wastes is considered the best environmental alternative for solving the problem of disposal. One such waste is plastic, which could be used in various applications. However, efforts have also been made to explore its use in concrete/asphalt concrete. The development of new construction materials using recycled plastics is important to both the construction and the plastic recycling industries. This paper presents a detailed review about waste and recycled plastics, waste management options, and research published on the effect of recycled plastic on the fresh and hardened properties of concrete. The effect of recycled and waste plastic on bulk density, air content, workability, compressive strength, splitting tensile strength, modulus of elasticity, impact resistance, permeability, and abrasion resistance is discussed in this paper.     

Bacteriophage Therapy for Critical and High-Priority Antibiotic-Resistant Bacteria and Phage Cocktail-Antibiotic Formulation Perspective

Food and Environmental Virology - Phage therapy is revolving to address the issues mainly dealing with antibiotic resistance in the pathogenic bacteria. Among the drug-resistant microbial...     

In vivo detection of mutagenic effects of diesel exhaust by short-term mammalian bioassays

Male Chinese hamsters were exposed to diesel exhaust and clean air for six months at the Center Hill Facility of the U.S. Environmental Protection Agency in Cincinnati, Ohio. The animals were kept in specially constructed inhalation chambers and exposed to clean air or diesel exhaust for eight hours daily. The animals were sacrificed and slides prepared to study the mutagenic effects of diesel exhaust by four in vivo short term mammalian bioassays. Sperm morphology bioassay revealed a 2.67-fold increase in sperm abnormalities in the animals exposed to diesel exhaust as compared to those exposed to fresh air. Micronucleus bioassay revealed a 50% increase in the number of micronuclei in polychromatic erythrocytes obtained from animals exposed to diesel exhuast. However, no increase in sister chromatid exchange or chromosomal abnormalities was observed in bone marrow cells of animals treated with diesel exhaust. During these studies a decrease in mitotic index was observed in animals treated with diesel exhaust.     

Fly ash leachate induces oxidative stress in freshwater fish Channa punctata (Bloch)

Oxidative stress inducing potential of fly ash leachate (FAL) was studied in a freshwater fish, Channa punctata (Bloch). Fish were exposed to fly ash leachate for 24 h and lipid peroxidation (LPO) was studied as a marker of oxidative stress. Catalase (CAT), glutathione S-transferase (GST) activities and levels of reduced glutathione (GSH) were also estimated in the exposed fish. FAL (1 ml/l) induced LPO in all the organs and most prominent response was in the gill. It also caused induction of enzymes and glutathione. Liver showed highest level of induction of enzyme activities. The results of this study demonstrate that fly ash constituents have potential to induce oxidative stress in fish and gills are the most vulnerable organs. It is also suggested that in case of exposure to FAL, along with LPO antioxidant defense is also activated to counteract the reactive oxygen species (ROS) at least partly in the initial stages of exposure.     

Comparison of a Subjective and a Physical Approach for Identification of Priority Areas for Soil and Water Management in a Watershed – A Case Study of Nagwan Watershed in Hazaribagh District of Jharkhand, India

The present investigation was an attempt to compare the within-watershed prioritization capabilities of a physical model based SDSS with the SYI and RPI model based subjective-SDSS, conventionally devised for between-watershed prioritizations, by All India Soil Survey and Land Use Planning Division of Ministry of Agriculture, Government of India. Application of these two approaches on a test watershed situated in Damodar-Barakar catchment in India, the second most seriously eroded area in the world, demonstrated that the proposed physical model based SDSS was capable of realistically and logically mimicking the sub-watershed-scaled water and soil losses thereby suggesting its immense application potential for priority area identification within the test watershed. In contrast to the proposed physical method, the subjective approaches, which assigned totally reverse priorities to about 67–93% of the test-sub-watersheds, were observed to be incapable of realistically assessing the impact of topography and varied land use and soil types in the test watershed on their sub-watershed scaled run-off and soil loss generating potential. Besides, the physical approach could be used for assessing the annual dynamics of the total water and sediment yields, under prevailing resource management systems in the test watershed with good to moderately good correlation coefficients of 0.83 and 0.65; model efficiency coefficients of 0.54 and 0.70; mean relative errors of –4.28% and –17.97% and root mean square prediction errors of 71.8 mm and 9.63 t/ha, respectively.     

Evidences showing 2,4-D ethyl ester and pencycuron-induced DNA damage in cyanobacteria and detection by PCR

The impact of 2,4-D ethyl ester and pencycuron in inducing DNA damage in three species of cyanobacteria-Anabaena fertilissima, Aulosira fertilissima, and Westiellopsis prolifica as evidenced by PCR-based assays: RAPD and 16S rRNA amplification was examined. Exposure of genomic DNA (in vitro) to pencycuron for 4 days did not produce severe damage in DNA fragments of all three cyanobacterial species whereas exposure to 2,4-D ethyl ester markedly inhibited the template activity of genomic DNA compared to untreated cultures of A. fertilissima. In A. fertilissima a single band of approximately 1000?bp was observed even after 16 days of exposure to 60?ppm pencycuron which suggests that certain segments of DNA are resistant to pencycuron DNA damaging effects. However, a significant effect was observed in the case of W. prolifica for 2,4-D ethyl ester and pencycuron where complete disappearance of fragments was not recorded even after 16 days of incubation and interestingly some new DNA bands were induced. Similar to the effects with RAPD profile, amplification of rRNA was significantly inhibited following exposure of genomic DNA to 2,4-D ethyl ester and pencycuron. Our findings clearly demonstrate that pesticide concentrations affected cyanobacterial DNA and lethality of these microbes might be due to irreversible DNA damage. Thus, it is postulated that PCR assays may be conveniently used for screening DNA damage produced by 2,4-D ethyl ester and pencycuron in all three cyanobacteria examined in this study.     

Assessment of radon concentration and heavy metal contamination in groundwater of Udhampur district,Jammu & Kashmir,India

Radon concentration was measured in water samples of 41 different locations from Udhampur district of Jammu & Kashmir, India, by using RAD7 and Smart RnDuo monitor. The variation of radon concentration in water ranged from 1.44 ± 0.31 to 63.64 ± 2.88 Bq L^?1, with a mean value of 28.73 Bq L^?1 using RAD7 and 0.64 ± 0.28 to 52.65 ± 2.50 Bq L^?1, with a mean value of 20.30 Bq L^?1 using Smart RnDuo monitor, respectively. About 17.07% of the studied water samples recorded to display elevated radon concentration above the reference range suggested by United Nation Scientific Committee on the Effects of Atomic Radiations (UNSCEAR). The mean annual effective dose of these samples was determined, and 78.95% samples were found to be within the safe limits set by World Health Organisation (WHO) and European Council (EU). The study revealed good agreement between the values obtained with two methods. Heavy metals (Zn, Cd, Fe, Cu, Ni, As, Hg, Co, Pb and Cr) were determined in water samples by microwave plasma atomic emission spectrometer, and their correlation with radon content was also analysed.     

Contamination of rice crop with potentially toxic elements and associated human health risks—a review

Environmental Science and Pollution Research - Production of rice, a major staple food crop, should be maintained both quantitatively and qualitatively to assure global food security. In recent...     

Social sustainability in supply chain decisions: Indian manufacturers

The purpose of the paper is to assess the inclusion of social sustainability in the decisions of supply chain in multinational manufacturing organisations in India. Indian organisations are resorting to sustainability-based reporting for greater transparency and for creation of brand value for their organisations. There are tremendous economic upheavals and changes across the complete value chain, and thus, responsible business practices are becoming a necessity for the long-term survival of organisations. Sustainability, as a strategy, is responsible utilisation of resources and is reported through social, economic and environmental factors in an organisation. For sustainability as a strategy, there has to be a complete organisational inclusion and employee engagement through decision making at operational levels along the value chain. The research paper is an empirical study done through a survey using a structured questionnaire to collect information to evaluate decision criteria particularly for social sustainability, from the middle and top level executives in Indian manufacturing organisations. Multinational manufacturing organisations in India are trying to be more responsible because of mandated CSR policy, and thus, sustainability through social factors is getting more prominence. A multiple linear regression analysis is used to explain the correlation and inclusion of social factors on the decision-making process in the supply chain of multinational manufacturing organisations in India. This study reveals that decision making in the supply chain of multinational manufacturing organisations in India specifically in manufacturing industry is incorporating social sustainability. The study highlights that decision making involving social sustainability needs larger frameworks for organisational preference. While the study provides evidence of social sustainability-based practices in multinational manufacturing organisations in India, it does not deal with social sustainability practices. The study also has limitation as has been limited to organisations which follow sustainability practices and make disclosures through GRI framework.